城市化進程的不斷加快使得水電氣這些惠及民生項目的使用群體也開始不斷壯大,與此同時針對一戶一表改造項目的智能水表備受供水企業以及老百姓關注,它的問世解決了水表入戶抄表以及收費等諸多痛點.我們知道,智能水表分為有線傳輸和無線傳輸兩種,最傳統還是有線抄表方案,無線傳輸是近兩年新興的一種抄表模式,那么,這兩種抄表方案有什么不同呢?

With the acceleration of urbanization process, the users of hydropower and electricity projects, which benefit people's livelihood, have begun to grow. At the same time, the intelligent water meter for one meter reconstruction project has attracted the attention of water supply enterprises and the people. The advent of the intelligent water meter has solved many painful points such as meter reading and charging. For wired transmission and wireless transmission, the most traditional or wired meter reading scheme, wireless transmission is a new mode of meter reading in recent two years. So, what are the differences between the two schemes?

智能水表廠家

Intelligent Water Meter Manufacturer

1、首先當然是他的抄表方式不同.有線抄表需要布線,總線為RS485或者M(jìn)-BUS,通過對應的協議傳輸?shù)郊衅?再傳輸?shù)诫娔X里.無線智能水表的無線抄表系統則不需要復雜的布線,不依賴人工入室抄錄,經由抄表終端參數值便能夠自行計算出水表的用量和費用.

1. First of all, of course, his meter reading methods are different. Wired meter reading needs wiring. The bus is RS485 or M-BUS. The corresponding protocol is transmitted to the concentrator and then to the computer. The wireless meter reading system of wireless intelligent meter does not need complicated wiring, does not rely on manual room reading, and can be calculated by itself through the parameter value of meter reading terminal. Calculate the amount and cost of the water meter.

2、工作原理不一樣.有線智能水表的抄表方式在抄錄表的過程中采用的是半手動抄錄模式,而在后期計量最終費用結果也是人工模式.而無線抄表系統則采用的是的現代先進的科學技術研制而成,不管是在抄錄階段還是在費用計量階段都能夠直接依賴系統計算而出,故而無線抄表系統的工作自動化程度要遠遠高于傳統抄表..

2. The working principle is different. In the process of reading meter, the wired intelligent water meter adopts the semi-manual mode, while in the later stage, the final cost measurement result is also the manual mode. The wireless meter reading system is developed by modern advanced science and technology, whether in the stage of transcription or in the stage of cost measurement. Sections can be calculated directly by the system, so the automation of the wireless meter reading system is much higher than that of the traditional meter reading system.

 http://www.wlove8.cn